Highlights Absolutely waterproof (Standard IP65, if breather is replaced with a sealed screw IP67) Framed flat gaskets with large sealing surface Extremely robust and thick-walled aluminium housing All outputs can be programmed without any restrictions Fully integrated wireless solution Brilliant display with menu in plaintext Bi-directional communication and programming Measures and displays the precise resistance…
Highlights Slim, high flames with low wind sensitivity and lowest possible fallout Integrated pressure accumulater buffers pressure fluctuations Operation with Isopar L, IPA or Ethanol Three control options: wired DMX, wireless DMX and optional Galaxis Advanced Radio Module For DMX (radio or cable) there is an input and output at the Pump Station with looping…
Highlights Up to three Flame Heads can be connected No mains power required, thanks to integrated battery solution with up to 90 h standby time DMX input and output with loop-through of the signal to up all Flame Heads and additional devices Rugged, power coated aluminum housing, protected against rainwater Operation with Isopar L, IPA…
Highlights Extemely fast, automated programming via PC Remote data requests, remote switch-off, sleep and wake-up from PC possible Full overview of all devices from the FOH Fast changes of the programming possible at any time More detailed information can be found in the current product catalogue below. Additional InformationThe PFM Advanced USB Radio Modem offers…
Highlights Extremely miniaturized Advanced technology High-contrast display and menu navigation in plain text All outputs individually programmable Measurement and display of the exact resistance values of all outputs Bi-directional remote data request and programming Innovative and pluggable terminal block enables extremely fast preparation Long operating time and sleep mode available Each of the five outputs…
Highlights Amazingly small handheld transmitter Direct selection of firing cues Dozens of possibilities per cue High level of safety thanks to the dead man function Robust membrane keypad More detailed information can be found in the current product catalogue below. Additional InformationThe PFS Pocket is a small handheld transmitter, which is perfectly suitable for magicians,…
Highlights The G-Flame Power Upgrade is a cartridge holder with an additional quick coupler, which can be plugged into the standard cartridge holder. This allows the usage of a total number of four cartridges instead of the usual two cartridges. The additional cartridges increase the flame height* to approx. 8 m. *If cartridges other than…
Highlights Very versatile flame effect device due to various control inputs: DMX, 12-24V, ext. contact, radio and RS485 No mains voltage required, thanks to the integrated battery solution with up to 60 h stand-by time Extremely weatherproof, can be used even in heavy rain without any problems Operation with inexpensive aerosol cans, gas cans or…
Highlights Plug&Play cabling Conventional e-matches can be connected Recurring shows can be reloaded extremely fast 60 outputs, individually programmable Integrated, high-brightness firing LEDs on each output for fast testing More detailed information can be found in the current product catalogue below. Additional InformationThe plug-in Airburst Matrix Module with 60 outputs enables the PFE Advanced receiver…
Highlights All features of the Matrix Module with 50/100 Outputs Cost-effective solution for numerous individual positions Simple pre-assembly possible Fast installation Wide fronts can be realized with only one receiver Output groups freely adjustable via coding bridge Integrated, high-brightness firing LEDs on each output for fast testing More detailed information can be found in the…
