Details If numerous G-Flames or L-Flames are used, the requirement to control a larger number of devices with a single emergency stop switch quickly arises. For this purpose, we offer 8-way and 16-way emergency off splitter. The emergency off splitters are supplied with power by a small plug-in power supply unit. They also have an…
Details This adapter includes a power supply unit for charging the device. Neutrik cables with mains voltage and cables with XLR plugs for DMX-512 can be plugged in, whereas 3-pole and 5-pole XLR plugs and sockets are available. Cables can also be plugged into the outputs to connect the next device. However, it is particularly…
Details The flame bars can be installed instead of the nozzle. The straight version is suitable for creating a long line of flames on stage, for example. The G-Flames with the Flame Bars can be arranged one after another for this purpose. The octagonal version can be used to to simulate a burn barrel. Flame…
Highlights Slim, high flames with low wind sensitivity and lowest possible fallout Integrated pressure accumulater buffers pressure fluctuations Operation with Isopar L, IPA or Ethanol Three control options: wired DMX, wireless DMX and Galaxis Advanced Radio Module For DMX (radio or cable) there is an input and output at the Pump Station with looping through…
Highlights Up to three Flame Heads can be connected No mains power required, thanks to integrated battery solution with up to 90 h standby time DMX input and output with loop-through of the signal to up all Flame Heads and additional devices Rugged, power coated aluminum housing, protected against rainwater Operation with Isopar L, IPA…
Highlights The G-Flame Power Upgrade is a cartridge holder with an additional quick coupler, which can be plugged into the standard cartridge holder. This allows the usage of a total number of four cartridges instead of the usual two cartridges. The additional cartridges increase the flame height* to approx. 8 m. *If cartridges other than…
Redesign out now! New flame sensor New tilt sensor On/off with Magnetic Pen Remote switch-off by radio Optional Sleep Mode Battery Saver Highlights Very versatile flame effect device due to various control inputs: DMX, 12-24V, ext. contact, radio and RS485 No mains voltage required, thanks to the integrated battery solution with up to 60…
